Building a balsa wood bridge - Should I use Gorilla glue or Crazy glue or something else? - balsa wood bridge
My writing teacher, it does not matter what kind of glue, but I would like the stronger of the two, so no need for so many, by far exceeding the deck of the custom. Thank you very much!
Sunday, January 24, 2010
Balsa Wood Bridge Building A Balsa Wood Bridge - Should I Use Gorilla Glue Or Crazy Glue Or Something Else?
8 comments:
Use a good quality power supply, which comes from specialty shops hobby airplane model. I like the ZAP brand in the green bottle. Beware the pink bottle, it is difficult to work.
The memory can una''marca have the house.''Read the label. if there are produced by BSI in Atascadero California, is run. NOTE ISB is synonymous with the blue bottle green bottle Zap.
Crazy Glue AC mark, the dollar store garbage and should be avoided.
Gorilla Glue, most appreciated.
Carpenter's wood glue is not as Elmer's tight bond and work well to respect that, but to use. It is water, and if used improperly, can warp the wood.
CA = cyan-acrylic adhesive type llamados''súper together.''Not all the same. Zap is mentioned specifically formulated for balsa wood. Inhalation of vapors. You can allergic
I would like to use wood glue yellow gold 2-epoxy.
Gorilla Glue is also for what they are complicated, and I do not work very well Crazy Glue.
What about sticking samples with 2 or 3 different types of glue? Then you can get an idea of how easy it is to be used. In addition, if an adhesive that works less well for the balsa wood, you can find it before the trouble to build a bridge.
Good luck.
I do not think Crazy Glue works fine.
Personally, I would like to conduct some experiments and comprise between the two candidates, almost as fast as Crazy Glue solidified melt. Even if you have access to a heat gun, glue things can, if necessary.
Gorilla Glue tends to establish very slowly, and foams and expands as it sets. Probably not the best choice for what they do. It needs also define moisture.
Super Crazy Glue or could be, but I suggest you try a little bit like a first example. Can work a little difficult. I want to use nitrile gloves if I were you, not completely connected with everything with your fingers.
Quick-drying glue model aircraft is another option that you are considering. This is not the glue for plastic models, but also for models in balsa wood. It is robust and very fast.
I agree with most of the answers here.
Gorilla Glue is not as good as its marketing and need to get wet Mess with the raft. Work well, too unpleasant too.
Crazy glue does not work, but penetrates into the porous raft very quickly and makes them brittle.
If not be wet, prudent use of wood glue is best. There is still much stronger than the wood you are working.
Invest a few dollars reverses Tweezers - those that closed during the spring effect which is not open and himself. They are ideal for precise positioning and clamping of small parts.
I say if you want good tail ... Use wood glue to wood.
Ok ... Timber wood glue ... very difficult ... or can super glue or crazy glue. He was, I had to do, and that our teacher has us use glue Elmer. The base material used in the nursery
Good luck!
Wood is a fast-drying glue, and works very well, but may need to press to ensure that make no moving parts in the drying. Low hot glue is a snapshot, and it works well on a raft. Do not use for the projection of the union, if pressed.
Post a Comment